(A) Adjustable Switch DC Motor Speed Controller 3V-35V 12V 24V PWM Ultra-small LED Fan Dimmer DC Motor Speed Controller
Specification:
Brand new
Module Size: approx. 30*24mm
Working Voltage: DC 3V-35V
Max Output Current: 5A
Control Power: Max 90W
Quiescent Current 0.015A (standby)
PWM Duty Cycle: 1%-100%
PWM Frequency: 10khz
Fine workmanship and good performance.
Stable and reliable.
Easy to use.
Long service life.
(C)
Voltage: DC 5V-16V
Continuous Current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM stepless speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), wide 2cm, high 1.4cm
(D)
This DC PWM 2A DC Motor Controller Module allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a duty cycle adjustment from 0%-100%. It also has an onboard self-recovery fuse 2A and a Power-On LED light.
Specifications:
Input supply voltage:1.8V-15VDC
Max output power:30W
Max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: 5 x 3 x 1.5 cm
(F)
DC 6-28 V 12 V 24 V 3A PWM Control Switch Driver DC Motor Governor Engine Speed Regulator
This DC Motor Speed Controller that allows you to control the direction of a DC engine using a DC Width-Modulada (PWM) voltage DC with a fully adjustable working cycle of 0%-100%.
The engine speed controller can easily provide a continuous 3A current for your CONTINUANT CORRENT engine or other DC load.
Specifications:
Input power supply: DC 6 V-28 V
Maximum output power: 80 W
Maximum continuous output current: 3A
Adjustable working cycle: 0%-100%
(A) Adjustable Switch DC Motor Speed Controller 3V-35V 12V 24V PWM Ultra-small LED Fan Dimmer DC Motor Speed Controller
Specification:
Brand new
Module Size: approx. 30*24mm
Working Voltage: DC 3V-35V
Max Output Current: 5A
Control Power: Max 90W
Quiescent Current 0.015A (standby)
PWM Duty Cycle: 1%-100%
PWM Frequency: 10khz
Fine workmanship and good performance.
Stable and reliable.
Easy to use.
Long service life.
(C)
Voltage: DC 5V-16V
Continuous Current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM stepless speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), wide 2cm, high 1.4cm
(D)
This DC PWM 2A DC Motor Controller Module allows controlling the direction of a DC the motor using a Pulse-Width-Modulated (PWM) DC voltage with a duty cycle adjustment from 0%-100%. It also has an onboard self-recovery fuse 2A and a Power-On LED light.
Specifications:
Input supply voltage:1.8V-15VDC
Max output power:30W
Max continuous output current :2A
Duty Cycle adjustable: 0%-100%
Size: 5 x 3 x 1.5 cm
(F)
DC 6-28 V 12 V 24 V 3A PWM Control Switch Driver DC Motor Governor Engine Speed Regulator
This DC Motor Speed Controller that allows you to control the direction of a DC engine using a DC Width-Modulada (PWM) voltage DC with a fully adjustable working cycle of 0%-100%.
The engine speed controller can easily provide a continuous 3A current for your CONTINUANT CORRENT engine or other DC load.
Specifications:
Input power supply: DC 6 V-28 V
Maximum output power: 80 W
Maximum continuous output current: 3A
Adjustable working cycle: 0%-100%
1x PWM DC Motor Speed Controller Module TECHMAKERS
